VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » KUSTOM - Hustler and Commander (reverb bummers)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: KUSTOM - Hustler and Commander [message #25260 is a reply to message #25232] Fri, 22 July 2016 06:14 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
The only difference is the tension setting of the inner pan support springs between both tanks for the different mounting positions , and this is easily changed with a needle nose plyer.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: proud new owner of a Kustom Kombo organ needs a little help
Next Topic: Kustom PA 300-5 and 150 bass combo chassis mounting screws
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Jun 09 23:35:03 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software