VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » K100-2 reverb problems
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K100-2 reverb problems [message #9530] Sun, 20 July 2008 23:44
raw-dogg is currently offline  raw-dogg
Messages: 13
Registered: January 2008
Location: nyc
Junior Member
Hello Vinatge Kustom fans,
I have a K100-2 head that worked fine when I bought it a few months ago. I unplugged the reverb unit so I could use the head for bass (I know...I know). It was suggested I clean the connectors on the RCA jack because another member had the same problem and that worked for him. I tried cleaning it but I'm still having the problem. When I turn up the reverb knob I get a HUM, sometimes a "low end" feedback and it sounds like the power cuts out a bit. And if I have the tremolo on the reverb cuts out the effect of the tremolo. I don't know what happened. It worked fine when I bought the amp. All I did was unplugged the reverb tank for a few months. DAMMIT!!! Can anyone help???

[Updated on: Sun, 20 July 2008 23:46]

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K 100 2 Footswitch
Next Topic: Kustom Guitar production Year?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jun 24 04:31:41 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software