stevem Messages: 4739 Registered: June 2004 Location: NY
Senior Member
What amp would you be using thru the cabinet to play Bass synth through it ?
It should be fine with 50 watts RMS of Bass thru it , but being guitar speakers there going to roll off lows pretty fast below 100 HZ!
I would have put my 250 watt t&r kustom bassamp on it before you gave me this information.
Since the guitar amp is only 8 or 16 Ohm this is also not a good option. Ill find something suiting.
I checked ohmage with a multimeter. One speaker was 10.5 ohm. The whole cab measured 4.1 indeed.
I think it has two speakers wired parallel and then the two sets in series. But im stil learning hehe.
stevem Messages: 4739 Registered: June 2004 Location: NY
Senior Member
Kustom tuck & roll amps and the mid 70s tolex series without effects could be used for guitar or bass as the internals / circuits where the exact same!
You could rewire the cabinet and get mire than close enough to a 8 ohm load out of it.