VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » My "newest" old amp
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
My "newest" old amp [message #5017] Tue, 02 November 2004 13:27
boogie brother is currently offline  boogie brother
Messages: 11
Registered: June 2004
Location: Myrtle Beach, SC (USA)
Junior Member
I just recieved an old Kustom amp off of ebay. It's a old model 745PA serial # 10925 and it's black. Problem is it came without the two fuse caps that are on the lower right hand side of the front control panel. The 1st fuse says Speaker - 5amp , the 2nd says Power - 3amp. Where can I obtain the correct fuse holder tops and more importantly what size fuse goes in this "Frankenstein" model. Also one of the "Treble" controls seems to be stuck in place. Other than that and some dust and cobwebs, she's in good shape. Any insight? Also there was a guy selling some Kustom schematics (copies) on ebay, that seems to be off now...any ideas? Thanx, any help appreciated. Kustom still King!!

Boogie Brother

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Looking For A Tech
Next Topic: '95' series 'Frankenstein' schematics
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 13 03:38:52 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software