VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Kustom Pro 3-W bins - need a new horn driver (Need a new compression driver)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom Pro 3-W bins - need a new horn driver [message #23571 is a reply to message #23570] Sat, 08 August 2015 11:29 Go to previous messageGo to previous message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
I found an old ebay listing for these cabinets......looks to me like they are for PA but guess they could be used for keyboards. The one's I'm looking at also had tweeters attached below the horn. Looks like everything is 8 ohms and the frequency range is listed on the input plate. One of the other guys here probably can tell you exactly what it was.....Pleat has a remarkable knowledge of this stuff.

Doubt you will be able to find exact replacements but PRV Audio does make a good 8 ohm driver that they claim rivals the original JBL 2425J........80 watts and frequency 1.2hz-21khz.

[Updated on: Sat, 08 August 2015 11:48]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Steve or ChicagoBill please help
Next Topic: Kustom K200D Bass Guitar tuners?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 08 10:22:16 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software