Home » VintageKustom.com » Repairing Kustom Amps » Anyone know someone who can add a harmonic clipper to my amp??

Show: Today's Messages :: Polls :: Message Navigator

Anyone know someone who can add a harmonic clipper to my amp?? [message #7008] Sat, 03 June 2006 23:13   gregsrollandpleat Messages: 4 Registered: April 2006 Junior Member Does anyone out here in kustomland know someone who could repair and modify my k200 amp with reverb and tremelo and it has the right side with just the 4 knobs...I want to add a harmonic clipper to this amp somehow....A guy put in a Fuzzit (??) channel that almost works but it is close but no cigar ...any help would be appreciated ...thanks Report message to a moderator

Re: Anyone know someone who can add a harmonic clipper to my amp?? [message #7009 is a reply to message #7008] Mon, 05 June 2006 07:20   stevem Messages: 4739 Registered: June 2004 Location: NY Senior Member Hi, Putting one in is easy, getting the right side preamp/harmonic clipper board and the coresponding plexiglass faceplate and knobs is another story.You will probibly have to search out a head with a blown output section that someone does not want to repair to get the clipper board. The circuit board number you are looking for is PC403. May the force be with you!Let us know how you make out. Report message to a moderator

Re: Anyone know someone who can add a harmonic clipper to my amp?? [message #7010 is a reply to message #7009] Tue, 06 June 2006 20:05   gregsrollandpleat Messages: 4 Registered: April 2006 Junior Member I guess what I am asking is do you know someone who can add that?? I dont care if it looks stock or not ...I just want to add that circuit to mine ....thanks Report message to a moderator

Re: Anyone know someone who can add a harmonic clipper to my amp?? [message #7011 is a reply to message #7008] Wed, 07 June 2006 07:31   stevem Messages: 4739 Registered: June 2004 Location: NY Senior Member In that case adding it is easy, its all of 3 wires to be unsolder from the current board for the channel, and then resolder onto the clipper board, drilling the holes in your face plate ( the holes are already there in the chassie) for the added controls and foot switch jack and put the knobs on and your done! Report message to a moderator

Previous Topic:	Need Schematic for Kustom Lead 1
Next Topic:	Kustom Amp Tech in Denver

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum