VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » need to test K250-1 (Bought a K250-1 on auction, how do I test it?)

Show: Today's Messages :: Polls :: Message Navigator

need to test K250-1 [message #28376]

Fri, 05 November 2021 04:42

coatikid
Messages: 4
Registered: November 2021

Junior Member

I picked up a K250-1 on auction and brought it home. It's bare metal, no tuck and roll, etc. Are there kits or replacements? The plastic sleeve on the power switch had broken off. Thanks to the community member who suggested on someone else's post that you can use zip ties to secure the switch to the mounting bracket. Works! My question is, without a suitable cab to test out this unit, how can I test this K250-1? Thanks

Report message to a moderator

[Message index]

		need to test K250-1 By: coatikid on Fri, 05 November 2021 04:42
		Re: need to test K250-1 By: stevem on Fri, 05 November 2021 06:09
		Re: need to test K250-1 By: coatikid on Sat, 06 November 2021 15:38
		Re: need to test K250-1 By: stevem on Sat, 06 November 2021 17:59
		Re: need to test K250-1 By: coatikid on Fri, 19 November 2021 01:31
		Re: need to test K250-1 By: coatikid on Mon, 22 November 2021 20:17
		Re: need to test K250-1 By: stevem on Sat, 20 November 2021 06:15
		Re: need to test K250-1 By: stevem on Sat, 20 November 2021 06:25
		Re: need to test K250-1 By: stevem on Sat, 20 November 2021 06:28
		Re: need to test K250-1 By: stevem on Wed, 24 November 2021 12:31

Previous Topic:	Diodes
Next Topic:	K150-1 Hum No Audio

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jun 25 06:02:44 EDT 2024