VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Kustom 100 and 200 A's and B's (Does anyone have PDF's of the face plates)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom 100 and 200 A's and B's [message #13220] Sun, 21 March 2010 01:04 Go to next message
jessadr is currently offline  jessadr
Messages: 15
Registered: November 2009
Location: Murfreesboro, Tn
Junior Member
I would really like to have a copy of those plexi faceplates if anyone has a scan of them
thanks
Jess

Report message to a moderator

Re: Kustom 100 and 200 A's and B's [message #13224 is a reply to message #13220] Mon, 22 March 2010 05:56 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
Just in the B serise of amps kustom made 5 different models, which means 5 different plexi face plates.
Is this what you are asking for, a copy of a face plate/control panel?

Report message to a moderator

Re: Kustom 100 and 200 A's and B's [message #13226 is a reply to message #13224] Mon, 22 March 2010 12:34 Go to previous messageGo to next message
jessadr is currently offline  jessadr
Messages: 15
Registered: November 2009
Location: Murfreesboro, Tn
Junior Member
Yes that is right, didn't think about that. I would like anything anyone had. Even one of any model would be good,

Report message to a moderator

Re: Kustom 100 and 200 A's and B's [message #13227 is a reply to message #13220] Mon, 22 March 2010 12:39 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
So whats up, is your current face plate scratched on the face badly, or is its lettering and knob markers worn off in some spots?

Report message to a moderator

Re: Kustom 100 and 200 A's and B's [message #13230 is a reply to message #13227] Mon, 22 March 2010 13:25 Go to previous messageGo to next message
jessadr is currently offline  jessadr
Messages: 15
Registered: November 2009
Location: Murfreesboro, Tn
Junior Member
No, I was working on building an amp like a old Kustom. Already sewed up the pleats for the cab. Just wondered if anyone had scaned a faceplate. I can make one with Photoshop if there isn't one out there. I might even find one off or a junk amp.
Just another one of my projects
thanks

Report message to a moderator

Re: Kustom 100 and 200 A's and B's [message #14323 is a reply to message #13220] Mon, 13 September 2010 01:21 Go to previous message
Domz is currently offline  Domz
Messages: 3
Registered: September 2010
Location: New York
Junior Member
Sorry to bump an old topic but I am in search of an original K200B-1 faceplate. I know that might be a long shot...

I would also be grateful if someone had or could scan their faceplate. I would be more then willing to pay (for a reasonable price of course) for their time and effort.

Many thanks in advance to anyone that can help.

-Dominic

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: kustom head
Next Topic: Black Naugahyde
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 07 15:40:03 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software