VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » K-200B-2 Hum/feedback

Show: Today's Messages :: Polls :: Message Navigator

Re: K-200B-2 Hum/feedback [message #25606 is a reply to message #25590]

Thu, 29 September 2016 09:51

stevem
Messages: 4742
Registered: June 2004
Location: NY

Senior Member

The output side of the tank should be on the side of the amp that is away from the power transformer, is that the way it is?

The loud buzz that you get when you touch the tip of the output cable is normal and will take place if the reverb control is turned up, as it's the same thing as touching the end of your guitar cable with the channel volume turned up.

If you short out the end of that cable with a clip lead or something to make a good connection then if the amp is ok then turning up the reverb control will add no hum!

[Updated on: Thu, 29 September 2016 09:56]

Report message to a moderator

[Message index]

		K-200B-2 Hum/feedback By: slk854 on Mon, 26 September 2016 17:34
		Re: K-200B-2 Hum/feedback By: chicagobill on Mon, 26 September 2016 19:01
		Re: K-200B-2 Hum/feedback By: slk854 on Mon, 26 September 2016 19:50
		Re: K-200B-2 Hum/feedback By: slk854 on Mon, 26 September 2016 20:16
		Re: K-200B-2 Hum/feedback By: chicagobill on Tue, 27 September 2016 02:59
		Re: K-200B-2 Hum/feedback By: stevem on Tue, 27 September 2016 05:53
		Re: K-200B-2 Hum/feedback By: slk854 on Tue, 27 September 2016 11:33
		Re: K-200B-2 Hum/feedback By: chicagobill on Tue, 27 September 2016 18:11
		Re: K-200B-2 Hum/feedback By: slk854 on Tue, 27 September 2016 21:53
		Re: K-200B-2 Hum/feedback By: chicagobill on Tue, 27 September 2016 23:24
		Re: K-200B-2 Hum/feedback By: stevem on Wed, 28 September 2016 05:51
		Re: K-200B-2 Hum/feedback By: stevem on Wed, 28 September 2016 19:19
		Re: K-200B-2 Hum/feedback By: slk854 on Wed, 28 September 2016 21:55
		Re: K-200B-2 Hum/feedback By: stevem on Thu, 29 September 2016 05:58
		Re: K-200B-2 Hum/feedback By: slk854 on Thu, 29 September 2016 08:44
		Re: K-200B-2 Hum/feedback By: stevem on Thu, 29 September 2016 09:51
		Re: K-200B-2 Hum/feedback By: slk854 on Thu, 29 September 2016 11:27
		Re: K-200B-2 Hum/feedback By: chicagobill on Thu, 29 September 2016 12:06
		Re: K-200B-2 Hum/feedback By: slk854 on Thu, 29 September 2016 12:31
		Re: K-200B-2 Hum/feedback By: chicagobill on Thu, 29 September 2016 14:22
		Re: K-200B-2 Hum/feedback By: slk854 on Thu, 29 September 2016 17:17
		Re: K-200B-2 Hum/feedback By: slk854 on Thu, 29 September 2016 20:28
		Re: K-200B-2 Hum/feedback By: stevem on Fri, 30 September 2016 06:10
		Re: K-200B-2 Hum/feedback By: slk854 on Fri, 30 September 2016 13:26
		Re: K-200B-2 Hum/feedback By: pleat on Fri, 30 September 2016 15:05
		Re: K-200B-2 Hum/feedback By: slk854 on Fri, 30 September 2016 16:28
		Re: K-200B-2 Hum/feedback By: slk854 on Fri, 30 September 2016 18:31
		Re: K-200B-2 Hum/feedback By: chicagobill on Fri, 30 September 2016 20:54
		Re: K-200B-2 Hum/feedback By: slk854 on Fri, 30 September 2016 23:13
		Re: K-200B-2 Hum/feedback By: stevem on Sat, 01 October 2016 06:28
		Re: K-200B-2 Hum/feedback By: chicagobill on Sun, 02 October 2016 01:41

Previous Topic:	K-100-2 wireing
Next Topic:	Kustom Low Voltage power supply boards

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jun 03 06:49:48 EDT 2024

.:: Contact :: Home ::.