VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Help with fixing Kustom L795RV
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Help with fixing Kustom L795RV [message #28854 is a reply to message #28847] Thu, 17 November 2022 12:43 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4746
Registered: June 2004
Location: NY
Senior Member
One of these amps with the main rail filter cans in good condition will do about 88 to 90 watts RMS into a 4 ohm load.
That's the best I have ever seen from one of these.
With a 8 ohm load you will see about 1/2 that.
As I recall the last time I rebuilt one of those it made 17 volts, or 36 watts rms into a 8.2 ohm load.

I recall the factory wattage ratings being at 5% distortion.

I only drive these amps with -10 db, or about. .150 volts @ 1K because that's all that is needed to drive these and many many other amps of all makes to there maximum clipped output wattage.
Remember these amp where made to have enough preamp gain to deal with the weak single coil pickups of the day back then!

[Updated on: Thu, 17 November 2022 12:54]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Frank schematic needed - PC101
Next Topic: I let the smoke out!
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 19 04:19:42 EDT 2024