Part of my Kustom K 100C-8 blew [message #9838] |
Sun, 02 November 2008 23:06 |
RickBlacker
Messages: 133 Registered: October 2008 Location: Oregon
|
Senior Member |
|
|
So last night, I was plugged into my amp, I felt a little shock, next thing I knew, my amp stopped playing. Looking at the amp from the front, it's the right side that stopped working. However, if I plug into the left side, that still works.
Is there anything obvious that I can check?
Is it most likely that I'm going to have to take it into repair? And if so, does anyone know where in the Portland Oregon area?
My amp : K100C-8
|
|
|
|
|
|
|
Re: Part of my Kustom K 100C-8 blew [message #11817 is a reply to message #9841] |
Sun, 13 September 2009 12:18 |
RickBlacker
Messages: 133 Registered: October 2008 Location: Oregon
|
Senior Member |
|
|
Hi Steve...
Wow, I forgot about this post. Just happen to stumble across it while browsing this various pages.
I've decided to do the repairs myself. Is there any chance you might be able to assist me in this project and process? Also, can you recommned while I'm in there any other parts that i might want to change out? Any caps that might need to be replaced?
I'm probably not equiped for diagnostics, but, I can do part replacement.
My amp : K100C-8
[Updated on: Sun, 13 September 2009 12:19] Report message to a moderator
|
|
|