K200B1 [message #4424] |
Mon, 05 July 2004 20:27 |
knucklehead
Messages: 3 Registered: June 2004 Location: The Que
|
Junior Member |
|
|
I'm new to the site but recently picked up a 2-12 cab(blue) with a K200 head(black) and I was looking for a wiring schematic for the head. Just trying to prepair or the possiblity of it needing repair in the future. Wondering if someone could help me out.
|
|
|
Re: K200B1 [message #4444 is a reply to message #4424] |
Thu, 08 July 2004 07:41 |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
HI, kustom heads use PC numbers on there circuit boards, Like pc5056, or pc703. PLUS, these boards have revision numbers also, like pc703 rev-1. These numbers face the amp wall they are mounted to, so to get the number you have to remove the board. I have some schematics,if you get your board numbers mail me a self addressed stamped envelope, and I will makw you copys of what I have. Steven Magnotti P.O box 1160 yorktown hts Ny 10598.Made one day, with my friend from this site Les, we can determin by amp serial number what board and revison number go to what head.
|
|
|
|
Re: K200B1 [message #4452 is a reply to message #4424] |
Thu, 08 July 2004 16:39 |
QModer
Messages: 413 Registered: June 2003
|
Senior Member |
|
|
Since you have a 100 series cab and a 200 series head would you be interested in selling the cab?
|
|
|
|
|
Re: K200B1 [message #4460 is a reply to message #4455] |
Fri, 09 July 2004 09:17 |
knucklehead
Messages: 3 Registered: June 2004 Location: The Que
|
Junior Member |
|
|
The head is actually working great, but it's pretty dirty on the inside, plus the ground wire on the inside came loose, causing some pretty good noise. I just mainly want the info just in case of bad mojo happening.
|
|
|