VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Troubleshooting a 250 model 1 Bass amp (250 Model 1 needs help!)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Troubleshooting a 250 model 1 Bass amp [message #27398 is a reply to message #27397] Wed, 26 June 2019 16:04 Go to previous messageGo to previous message
Byteviolator is currently offline  Byteviolator
Messages: 13
Registered: June 2019
Junior Member
Hi Bill,

On the orange wire I measure -1.45V
I got no output when I connected a signal to the module jack. However, doing a continuity test I've noticed that the blue wire connected to the jack is grounded to the chassis along with the ground side of the jack. Is this normal? Maybe the module jack is shorted?

Thanks so much for your help

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom III lead pc board 5065 rev2
Next Topic: Kasino u100-p (Club) and u200-p (Concert) repair
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 05 13:34:57 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software