VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Switches that might rebuild bad rotary switches (Switches with correct type switch decks)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Switches that might rebuild bad rotary switches [message #26812] Fri, 20 July 2018 13:54
Saransk is currently offline  Saransk
Messages: 20
Registered: February 2017
Location: Northern Virginia
Junior Member
I found a company Electronic Surplus that carries a CTS SPDT rotary switch that looks like it's switch deck is the same as found on the "Bright" switches that many Kustom preamp boards use, especially the 100 & 200 "plexi" amps.

You'll have to do a little "surgery" to swap the decks, but it should work.

There's also an "unmarked" switch with same kind of switch deck that might work as well.

Michael

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: help to identify proper 250v slow blow AC fuse for 72 coupe?
Next Topic: K100-2 3754 Bias Diode
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jun 10 06:10:18 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software