Home » VintageKustom.com » Repairing Kustom Amps » Kustom part
Kustom part [message #1049] Mon, 26 November 2001 18:59 Go to next message
GDubb
Messages: 1
Registered: November 2001
Location: Kansas City
Junior Member
I need an IC (prefer 2) that is Kustom Part # 007-7015-00. I have a Kustom 300 and this IC is blown, which kills the reverb circuit. The IC is an SL14228, 14 pin dual op-amp. Anyone know a source for this part? Thanks in advance! GDubb
Re: Kustom part [message #1050 is a reply to message #1049] Mon, 26 November 2001 23:48 Go to previous messageGo to next message
KustomBlues
Messages: 490
Registered: June 2001
Location: Michigan
Senior Member
Try www.mouser.com and good luck! Deb
Re: Kustom part [message #1051 is a reply to message #1049] Tue, 27 November 2001 00:34 Go to previous messageGo to next message
KustomBlues
Messages: 490
Registered: June 2001
Location: Michigan
Senior Member
Crap, Mouser doesn't have them. Try this address: http://www.summitelectronics.com/search.html or http://www.findchips.com/cgi-bin/nph-findchips.cgi or http://www.brookdale.com/
Re: Kustom part [message #11048 is a reply to message #1049] Fri, 15 May 2009 17:44 Go to previous message
gdtaylor is currently offline  gdtaylor
Messages: 3
Registered: May 2009
Location: Fayetteville, NC
Junior Member
Use an NTE725 Dual Op Amp IC. Same pin outs with lags.
Previous Topic: K250 hiss on selectone channel
Next Topic: K150 blows fuses
Goto Forum:
  


Current Time: Thu Mar #d 21:11:02 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.