Home » VintageKustom.com » Replacement Part Suggestions » Footswitch Help (Matching footswitch)
Footswitch Help [message #11066] Wed, 20 May 2009 12:31 Go to next message
burnthogan is currently offline  burnthogan
Messages: 12
Registered: May 2009
Junior Member
I just picked up a Kustom K250-4 Amp Head. I need a footswitch for the effects (trem, reverb, harmonic clipper) any ideas what model I should be looking for.

oh, and what is the best way to date this amp head?
Re: Footswitch Help [message #11067 is a reply to message #11066] Wed, 20 May 2009 12:45 Go to previous message
stevem is currently offline  stevem
Messages: 4299
Registered: June 2004
Location: NY
Senior Member
Nobody offers a 3 botton foot switch so you have to make one,or go with 4 botton switch of any type even with LEDs as long as the switches are not the momentary type, the you just have to wire it to the proper connector and many of us here can help you with that or you can do a search for prevous post that have covered the wiring many times.
As far as dating the amp to the T, all the pot in the amp have a 8 diget date code starting with 137 than a dash, of the bell face of the power transformer has a stamped date code also.
Previous Topic: Kustom III PA Horn Driver
Next Topic: 2x15 speakers 16 ohms
Goto Forum:
  


Current Time: Sun Sep #d 18:34:11 EDT 2020
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.