mcline5804 Messages: 13 Registered: January 2007 Location: kansas city
Junior Member
Don,
Thanks for the help with replacing my power cord. You stated
to get the full watts out of my K200 was to add another cabinet
what I want to do is replace the CTS'S I have with Altec 421A'S.
Since the Altec's are 8 ohm speakers then when wired the right
way I should get to the 4 ohms?
pleat Messages: 1452 Registered: June 2004 Location: Belding, Mi
Senior Member
Yes, install the two 8 ohm Altec's and wire them in parallel to get the 4 ohm load to the amp. Good choice on speakers. BC and JC love the Altec's.
Don
BC Messages: 583 Registered: March 2000 Location: Kentucky
Senior Member
421A's are my favorite....JBL D140s are deep and smooth but I like the punch and clarity of the Altec best. Most of my amps have the CTS. Someday you should try two 8 ohm CTS cabinets with a K200 head. That is another nice tone if you do not mind the inconvenience of a second cabinet. It was great to meet you Mark. I look forward to hearing of your Kustom adventures! BC