VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » KUSTOM 1145 PA (DIAGRAM TO FIX OLD KUSTOM)

Show: Today's Messages :: Show Polls :: Message Navigator

KUSTOM 1145 PA [message #11452]

Fri, 24 July 2009 02:16

bassgrove
Messages: 3
Registered: July 2009

Junior Member

hi!!!..i need you help ,you vintage kustoms experts..
i decide to suscribe my self at this forum by 2 reasons.
learn more about kustom gear and try to get the 1145 pa diagram.
i want to fix it..but i dont have any information...theres almost nothing out there,,and this forum could be the holy anwer..
i really need you help guys....if you have it..say it please.
well-breadings...peace and long life!!!!!!
thanks for ur time!
byke!!!!

Report message to a moderator

Re: KUSTOM 1145 PA [message #11453 is a reply to message #11452]

Fri, 24 July 2009 05:55

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Hello and welcome.
Can you post a shot or two of the inside of the head as I think I have both choises of schematics that you may need.

Report message to a moderator

Re: KUSTOM 1145 PA [message #11454 is a reply to message #11452]

Fri, 24 July 2009 08:22

pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi

Senior Member

Welcome, and I'm sure someone can help you. Your model number indicates that it is a K200A-5 PA head. The 1145 model is the head with the the 2 3x15 siren cabinets. It is pictured in the 67/68 catalog in the literature section of this site.
Don

Report message to a moderator

Re: KUSTOM 1145 PA [message #11455 is a reply to message #11452]

Fri, 24 July 2009 14:03

bassgrove
Messages: 3
Registered: July 2009

Junior Member

yep..i will take some pics..sure most to help..ja..its very old, it looks like a cesars salad..ja.
im going to up them in a moment..so..thanks a lot..
you are so cool...peace and remember...from ordinary to extraordinary-long life!!!!!!

Report message to a moderator

Re: KUSTOM 1145 PA [message #11456 is a reply to message #11452]

Fri, 24 July 2009 20:30

Optyk
Messages: 125
Registered: August 2006
Location: Texas

Senior Member

If the unit is a K200B-5, I have a pdf file of the schematic. It's made to print out to 11" x 17" paper. Send me your email and I'll send you the file.

Rod

There's only two kinds of music. . . . blues and zippity doo dah.

Report message to a moderator

Re: KUSTOM 1145 PA [message #11460 is a reply to message #11456]

Sat, 25 July 2009 10:38

pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi

Senior Member

The model number 1145 is the A series K200. Same as the 745 and the 795 models of the same era. The K200B series started the standard models of K200B-1, K200B-2, K200B-3, K200B-4 and K200B-5 which made it a lot easier for kustom to simplify the heads and labeling schematics. I know there are changes to the circuits between the A and the B series but not being a tech, I don't know what they would be. If you can tell us what the amp is doing or not doing, it might be easier for a tech to help pinpoint where to start looking. Does the amp even turn on? Works but hum or low power? Reverb not working?

Don

Report message to a moderator

Re: KUSTOM 1145 PA [message #11461 is a reply to message #11460]

Sat, 25 July 2009 12:02

Optyk
Messages: 125
Registered: August 2006
Location: Texas

Senior Member

I'm not a tech either, so don't quote me on any of this. But I believe I remember reading that there is a definite difference between the circuitry of the A-series compared to the B-series.

I sent the original poster a copy of the PDF file I created that has all the K200B-5 circuitry. I hope he's reading this if his unit is an A-series, since apparently, the schematics I sent him are not for his amp.

If anyone else needs a copy of the K200B-5 schematic, let me know.

Rod

There's only two kinds of music. . . . blues and zippity doo dah.

Report message to a moderator

Re: KUSTOM 1145 PA [message #11462 is a reply to message #11461]

Sun, 26 July 2009 19:09

bassgrove
Messages: 3
Registered: July 2009

Junior Member

hi guys-here is a pic of my amp-...well the transistors are right..
just one doesnt works..i changed it ..now im taking of the old conections for new in the same way..when i turn it on the light have a litle energy..does not any sound....im doing a test to know what happens..i dont know where is the correct model ..if is a or b--in the pc amp(the circuit of the amp power) says 702---its the only information i have ..
http://www.anumex.com/pictures/967071-3.jpg

i think that with the right schematic i could fix it.

im doing a �pen heart operation..let me discover something else and then i will tell you whats going on...

well,,,breadings..and thanks a lot for everything..
pd.if somebody have the k200-a model schematic please let me know.

peace and long life!!!!!!!!!

Report message to a moderator

Re: KUSTOM 1145 PA [message #11463 is a reply to message #11452]

Mon, 27 July 2009 06:07

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Please post a picture of the inside of the amp, not the outside!

Report message to a moderator

Previous Topic:	Question and opinion
Next Topic:	K 200 bass Amp popping sound

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Apr #d 17:15:08 EDT 2024

.:: Contact :: Home ::.