Home » VintageKustom.com » Repairing Kustom Amps » Kustom 2001 A1 Fuse Size

Show: Today's Messages :: Show Polls :: Message Navigator

Kustom 2001 A1 Fuse Size [message #12030] Mon, 28 September 2009 21:55   LZBass Messages: 16 Registered: September 2009 Junior Member I need some help identifying the correct fuse size for a 1968 Kustom K200A-1 amp. When got the amp it had a blown 7A fuse in it. I purchased a schematic for it, but it only calls for a "CB2 Input Overload." I've read references here stating fuse sizes from 3A to 5A. I want to make sure I get the right size fuse. Any help is appreciated! Thanks, -- Phil -- Report message to a moderator

Re: Kustom 2001 A1 Fuse Size [message #12036 is a reply to message #12030] Tue, 29 September 2009 05:46   stevem Messages: 4733 Registered: June 2004 Location: NY Senior Member Hello, the K200A model uses a 3 amp fast blow type fuse. In a pinch you could use a 2.5 amp slow blow type Report message to a moderator

Re: Kustom 2001 A1 Fuse Size [message #12044 is a reply to message #12036] Tue, 29 September 2009 10:09   LZBass Messages: 16 Registered: September 2009 Junior Member Thanks! Now on to replacing the fuse and troubleshooting the amp. -- Phil -- Report message to a moderator

Re: Kustom 2001 A1 Fuse Size [message #12045 is a reply to message #12030] Tue, 29 September 2009 10:45   stevem Messages: 4733 Registered: June 2004 Location: NY Senior Member I would use a 1.5 amp fast blow type to trouble shoot with as that may save some parts more parts from popping. The 1.5 amp will hold as long as their or no shorts or you do not need to run the amp up to full output. Report message to a moderator

Re: Kustom 2001 A1 Fuse Size [message #12049 is a reply to message #12045] Tue, 29 September 2009 15:47   LZBass Messages: 16 Registered: September 2009 Junior Member Thanks... I'll do that. The only other visible damage is the the chassis appears to have bee dropped at some point as the power transformer brakets are bent! Thanks again for the help, -- Phil -- Report message to a moderator

Previous Topic:	Taking the K100C-8 to a repair shop.... Questions for you guys.
Next Topic:	I NEED HELP FOR MY K-200B 2 HEAD!!!

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum