Home » VintageKustom.com » Replacement Part Suggestions » Kustom Studio 4-valve rebuild (looking for parts ideas)
Kustom Studio 4-valve rebuild [message #12335] Tue, 10 November 2009 11:28
JBranch is currently offline  JBranch
Messages: 9
Registered: November 2009
Location: Central GA
Junior Member
Hi all, I'm gathering info on materials to rebuild my Kustom Studio 4-valve cabinet. I have some duplicate threads around on this, but thanks to the help of lots of kind folks on the internet, I've gathered together some info on it.

I have the power amp, the tubes, and the control section, so I'll be rebuilding the cabinet. I have the dimensions of the cabinet and know that it is oak. I have to replace the speakers, I have a picture showing them as Celestion G12-80s. The closest thing I can find now is the Celestion G-12 Classic Lead. I'm ASSUMING that this is the same speaker?

Casters are no big deal.

I've found a Fender handle that looks pretty close, but it has silver fasteners instead of gold.

I also need some tweed material for the cover. The original was a rectangular tweed weave.

And I need a speaker baffle. I've used the search function here, and was recommended to use fiberglass speaker enclosure from Radio Shack. I haven't checked on this yet.

I have the original "K Studio 4-Valve" badge, but am missing the smaller "Celestion" badge.

Amy I missing anything? Ideas for sources on the things I don't have?

Note: I'm not trying to hoodwink anyone by rebuilding this and selling it as "vintage" I just want to build it back as close as possible to original condition.

Thanks,
John
Previous Topic: Kustom K2504 Footswitch Needed
Next Topic: need part
Goto Forum:
  


Current Time: Thu Oct #d 21:56:39 EDT 2020
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.