VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Need Reverb tank for K250-2

Show: Today's Messages :: Show Polls :: Message Navigator

Need Reverb tank for K250-2 [message #12423]

Mon, 30 November 2009 15:23

sniperkittie
Messages: 4
Registered: November 2009

Junior Member

Need Accutronics tank ~ Kustom P/N 031-0047-01 or replacement recommendation.

Mr Shuett at the old Accutronics site says their number was 4BB2C1D. He added that a 4BB3C1D would also work.

Any assistance would be greatly appreciated.

I am located near Houston, TX

[Updated on: Tue, 01 December 2009 18:45]

Report message to a moderator

Re: Need Reverb tank for K250-2 [message #12429 is a reply to message #12423]

Mon, 30 November 2009 16:22

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

you want to get the first one for a stock delay time, if you want a wetter/ longer delay reverb but with less high end go with the second tank.

Report message to a moderator

Re: Need Reverb tank for K250-2 [message #12431 is a reply to message #12429]

Mon, 30 November 2009 16:41

sniperkittie
Messages: 4
Registered: November 2009

Junior Member

Thanks for the information. Now all I have to do is find the first one. Easier said than done, I bet.

Report message to a moderator

Re: Need Reverb tank for K250-2 [message #12433 is a reply to message #12431]

Mon, 30 November 2009 18:49

chicagobill
Messages: 2005
Registered: April 2003

Senior Member

Check with Antique Electronics, they had some NOS Kustom tanks, cheap. Try Google.

Now that Belton has bought out Accutronics, I wonder what the quality of the new tanks will be?

Report message to a moderator

Re: Need Reverb tank for K250-2 [message #12434 is a reply to message #12423]

Tue, 01 December 2009 18:52

sniperkittie
Messages: 4
Registered: November 2009

Junior Member

Ordered a tank from Antique Electronics today. Opted to go with the long decay time.

Need one of the anti-vibration mounting studs for tank in the K250-2 now. Found out one was broken when I removed the old tank in prep for the new one due Friday. I wonder where the broken part went. I beleve that someone must have removed the tank before I got the amp.

Report message to a moderator