Alan Messages: 2 Registered: January 2010 Location: USA
Junior Member
I need a lamp cover, The power lamp cover on this amp was square, translucent, blue plastic, the only reason I know that is because the base of the lens was still in there when I found the amp at a pawn shop. If you have an extra one, I'd be proud to buy it provided I don't have to take out a loan to afford it!
kustomoholic Messages: 227 Registered: March 2009 Location: Tulsa,oklahoma
Senior Member
I have 3 of the blue lens covers....I will need to pull my Charger chassis to see if they are correct for the Charger or if they fit the metalface 150,250,300,600 series switches. If any one out there knows for sure about this it would save me trouble taking em apart to see if they match the SS series amps.
Kraig
Alan Messages: 2 Registered: January 2010 Location: USA
Junior Member
Hey Kraig: I was thinking about your last post and it dawned on me that maybe I should pull the chassis from my amp to save you the trouble of pulling yours. That is if my assumption about why you needed to pull it in the first place is correct. Does the schematic have part numbers or some way to identify the lens? I need to pull mine anyway just to service a noisy left input and to clean house a bit. Let me know if I need to look for something in particular to help with your question about your lens covers.
kustomoholic Messages: 227 Registered: March 2009 Location: Tulsa,oklahoma
Senior Member
Alan... here is my email kustomoholic@aol.com. Send me an email with "charger" in content... I will get a pix and send a shot of what I have.. I havent looked in mine as of yet.
Kraig