Home » VintageKustom.com » Replacement Part Suggestions » *sigh* Speakers
*sigh* Speakers [message #13601] Sun, 09 May 2010 02:38 Go to next message
kbass20 is currently offline  kbass20
Messages: 14
Registered: April 2010
Location: Danville, In.
Junior Member
So I'm shopping for new speakers. I can't seem to make up my mind, so help me please!

I'm replacing the speakers in my newly acquired 69 K200-B1 w/ 2x15" CTS

I gig'ed it for he first time last weekend and it wasn't good! I couldn't hear myself and I was standing in front of the cab, and all I could do is just feel the vibs. My Volume was at 10-11 a'clock and my bass and treble at 12. The old CTS's were very gassy (they made alot of farty sounds). Because the cab was, mic'ed I had to keep the volume down for the house mix to sound clean.

Anyways this is what I'm looking at (by the way I play bass)

Weber Ceramic Michigan 15' w/ bass cone and aluminum cap https://taweber.powweb.com/weber/michigan15f.htm

Eminence Alpha 15A
http://usspeaker.com/ALPHA15-1.htm

EV Force 15
http://usspeaker.com/ev%20force15-1.htm


What do you think?
Noah


Re: *sigh* Speakers [message #13602 is a reply to message #13601] Sun, 09 May 2010 02:53 Go to previous messageGo to next message
kbass20 is currently offline  kbass20
Messages: 14
Registered: April 2010
Location: Danville, In.
Junior Member
Ok I might have answered my question but here's another one that i'm a bit more close to liking!

Eminence Delta 15LFA
http://usspeaker.com/Delta-15LFA-1.htm
Re: *sigh* Speakers [message #13625 is a reply to message #13601] Mon, 10 May 2010 07:18 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4736
Registered: June 2004
Location: NY
Senior Member
First of all you need to hook up a ohm meter to the end of a speaker cable and find out what impeadance the cabinet is.
That amp will output darn close to 100 watt rms into a 4 ohm load, or about 65 into a 8 ohm load, so for bass you will want to run it with a 4 ohm load, so something is up as even if you where at 8 ohms you should have beed able to keep up with the other band members.

You can not use the EV driver as it need more internal cab volume than what that 2-15 cabinet has, and the Eminence driver has too small a magnet.
I would go for the Eminence Delta 15LF, or from the parts express catalog, the model 264-338 Selenium model 15 which is a great driver and near half the price.

[Updated on: Mon, 10 May 2010 07:19]

Report message to a moderator

Re: *sigh* Speakers [message #13641 is a reply to message #13625] Wed, 12 May 2010 01:36 Go to previous message
kbass20 is currently offline  kbass20
Messages: 14
Registered: April 2010
Location: Danville, In.
Junior Member
Thanks Stevem!

I think I'm going to buy the Selenium. It almost seems to be the same as the Delta! Only cheaper!

Noah
Previous Topic: for those of you looking for kustom style handles
Next Topic: Kustom 88 piano
Goto Forum:
  


Current Time: Mon May 13 22:59:16 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.