VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Fz952 transistor

Show: Today's Messages :: Show Polls :: Message Navigator

Fz952 transistor [message #16462]

Fri, 25 November 2011 17:50

conductortom
Messages: 96
Registered: July 2010
Location: Okla

Member

Anybody know what transistor will cross over to an FZ 952? It's transistor Q711 on a PC 703 board. Thanks,
Tom

Report message to a moderator

Re: Fz952 transistor [message #16465 is a reply to message #16462]

Sat, 26 November 2011 14:21

chicagobill
Messages: 2005
Registered: April 2003

Senior Member

Q711 on my schematic is a 2N3638 transistor. The FZ952 is a Zener diode.

Report message to a moderator

Re: Fz952 transistor [message #16466 is a reply to message #16465]

Sat, 26 November 2011 17:20

conductortom
Messages: 96
Registered: July 2010
Location: Okla

Member

Ok. The schematic I'm looking at show an npn transistor with the collector not connected. I thought the symbol for a zener looked like a diode with a bent line. Please excuse my lack of knowledge. Just learning. Thanks

Report message to a moderator

Re: Fz952 transistor [message #16467 is a reply to message #16462]

Sat, 26 November 2011 23:18

chicagobill
Messages: 2005
Registered: April 2003

Senior Member

That transistor is being used as a diode, that's why there is no connection to the collector. And yes, a Zener diode is drawn just like a regular diode with a Z shaped line in the middle.

Report message to a moderator

Re: Fz952 transistor [message #16468 is a reply to message #16467]

Sun, 27 November 2011 11:54

conductortom
Messages: 96
Registered: July 2010
Location: Okla

Member

Thank you,Chicagobill

Report message to a moderator

Re: Fz952 transistor [message #16486 is a reply to message #16462]

Thu, 01 December 2011 06:10

GianettiCharles
Messages: 1
Registered: December 2011
Location: 3715 Main St, Bridgeport,...

Junior Member

Transistor Q711 on a PC 703 board now crosses that Fz952 transistor.Its gives additional capacity for adopting energy for system.Its result good.

Tim Manning

Report message to a moderator

Re: Fz952 transistor [message #17491 is a reply to message #16486]

Tue, 02 October 2012 06:09

alacratstore
Messages: 2
Registered: October 2012
Location: USA

Junior Member

Does these diodes support all functions as that of transistor or it is exactly same?? Can we use the Zener diode as the default one? And what would you say about Q711 transistor?

sewing

[Updated on: Tue, 02 October 2012 06:10]

Report message to a moderator

Previous Topic:	Few questions about replacement speakers
Next Topic:	casters

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Apr #d 07:51:42 EDT 2024

.:: Contact :: Home ::.