VintageKustom.com: Comment Board » Kustom studio 4 valve

Home » VintageKustom.com » Comment Board » Kustom studio 4 valve (New amp)

Show: Today's Messages :: Show Polls :: Message Navigator

Kustom studio 4 valve [message #18900]

Sat, 22 June 2013 13:12

Down
Messages: 4
Registered: June 2013
Location: Denmark

Junior Member

Hi everyone.

I just bought a Kustom studio 4 valve, today at a private auction. I don't know much about these amps but it sounded great and the bids were so low that, i just had to take it home. It's in fairly good condition, a few dings and scrathes here and there, but all channels are functioning and it actually sounds really good. The thing is, I really dont need the amp, since I already have one too many amps, so i was wondering how much these are worth these days?

Best regards
Lars

Report message to a moderator

Re: Kustom studio 4 valve [message #18902 is a reply to message #18900]

Sat, 22 June 2013 20:39

pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi

Senior Member

Is your Studio 4 valve a head only version or the combo 2x12 Celestion, or the single 15' Electro Voice speaker version?
Is the footswitch still with the amp?
Pricing is difficult, since your in Denmark. I don't think I've seen many pop up on ebay so you may want to do a search on completed items on ebay to see what they have sold for in the past. The footswitch would be a big plus.
pleat

Report message to a moderator

Re: Kustom studio 4 valve [message #18903 is a reply to message #18902]

Sun, 23 June 2013 04:36

Down
Messages: 4
Registered: June 2013
Location: Denmark

Junior Member

its the combo 2x12 celestion version but without the footswitch unfortunately.

Report message to a moderator

Re: Kustom studio 4 valve [message #18948 is a reply to message #18902]

Sun, 07 July 2013 11:47

Kochens
Messages: 80
Registered: April 2009
Location: Denmark

Member

Hello Pleat. There is no 4 valve studio head. The only head is the 2 valve studio.
Razz

Report message to a moderator

Re: Kustom studio 4 valve [message #18949 is a reply to message #18900]

Sun, 07 July 2013 11:59

Kochens
Messages: 80
Registered: April 2009
Location: Denmark

Member

Hej Down.
De kommer ind imellem på dba. hvor du sandsynligvis har købt din?
I Danmark er prisen nogenlunde omkring 3000,-4000,-
I US langt mindre, da der findes flere OVER THERE.Faktisk er de kopier/layout minder om Fender Bassman/Musicman med forskelle. Feks.Transistor pre. rør power. Problemet med dem kan være molex forbindelser på pre-amp boardet.Jeg har 2 valve versionen, som er en fed rock-maskine.

Report message to a moderator

Re: Kustom studio 4 valve [message #18955 is a reply to message #18949]

Mon, 08 July 2013 13:38

Down
Messages: 4
Registered: June 2013
Location: Denmark

Junior Member

Hej Kochens.
Tak for dit indlæg. Jeg købte den på en privat auktion i forbindelse med et slags støttearrangement. Jeg har nu sat den til salg på DBA til 3000, så nu må vi se om den ryger:) Men ja, jeg er ret overrasket over hvor fedt den lyder. Især dens clean er jeg meget imponeret over.

Mvh Down

Report message to a moderator

Re: Kustom studio 4 valve [message #18987 is a reply to message #18955]

Sun, 14 July 2013 17:44

Kochens
Messages: 80
Registered: April 2009
Location: Denmark

Member

Hej Down
Det er netop clean kanalen som er fed på denne forstærker, den tager super imod pedaler. Såkaldte gain kanal/2 fungerer overhovede ikke. Synd du ikke vil beholde den. Har du prøvet at presse udgangsrør ca. 2/3 dele på clean? Ren Fender Bassman vintage, på den rigtige måde.Men held og lykke med salget.

Report message to a moderator

Re: Kustom studio 4 valve [message #18988 is a reply to message #18948]

Mon, 15 July 2013 06:45

pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi

Senior Member

Here in the USA, Kustom did offer the Studio Valve amp, all three models were available 50/100/150 watt models in the head version.
My literature has pictured the 4 valve head in black tolex model sitting on top of a 4 valve Celestion oak cabinet and a 4 valve SRO oak cabinet.
pleat

Report message to a moderator

Re: Kustom studio 4 valve [message #18989 is a reply to message #18955]

Mon, 15 July 2013 10:51

Down
Messages: 4
Registered: June 2013
Location: Denmark

Junior Member

@Kochens Jeg er helt enig i at kanal 2 er rimelig ubrugelig, men dens clean lyder sgu vildt når man presser den:) Jeg ville egentlig også gerne beholde den, men jeg er godt dækket ind på forstærkerfronten, så jeg kan ikke rigtig forsvare at have den stående:) Så nu er den på den blå og så begynder det jo at vælte ind med skambud;)

Report message to a moderator