Home » VintageKustom.com » Repairing Kustom Amps » Kasino Natural bass head (Disassembling the unit)

Show: Today's Messages :: Show Polls :: Message Navigator

Kasino Natural bass head [message #19733] Sat, 14 December 2013 17:51 tito566 Messages: 45 Registered: August 2013 Member Hey there all, hope I can get some direction here. I have a Kasino Natural head with a pretty noisy pot, if I had to guess. This just started happening this week, it's been problem free up till this point. Anyway, hope someone can advise on how to remove the cover and/or panel to gain access to the insides. I'd like to try and spray the pot out before taking to a pro. Thanks a lot! Report message to a moderator

Re: Kasino Natural bass head [message #19734 is a reply to message #19733] Sat, 14 December 2013 20:45   pleat Messages: 1452 Registered: June 2004 Location: Belding, Mi Senior Member There should be 4 screws on the bottom of the unit. Remove them and the amp should slide out the front. pleat Report message to a moderator

Re: Kasino Natural bass head [message #19735 is a reply to message #19733] Sat, 14 December 2013 23:59 chicagobill Messages: 2005 Registered: April 2003 Senior Member If it doesn't have the 4 screws on the bottom, try removing the screws that hold the handles on the sides of the case. I think the Fever head that I worked on recently, was held in by the handle screws. Report message to a moderator

Re: Kasino Natural bass head [message #19741 is a reply to message #19735] Sun, 15 December 2013 14:02 tito566 Messages: 45 Registered: August 2013 Member Thanks guys! There are four screws holding the feet in so I'll try both suggestions. Thanks again Report message to a moderator

Previous Topic:	K 300
Next Topic:	how to sew Kustom Tuck and Roll

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum