VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Bass 150 Smoked

Show: Today's Messages :: Show Polls :: Message Navigator

Bass 150 Smoked [message #2283]

Fri, 03 January 2003 11:12

Anonymous

I have an old Bass 150 that starting smoking last night. I opened the cover and saw one of the resistors smoldering. I had been having some trouble with heat that was causing the amp to cut out. I installed a small fan and that seemed to do the trick... until last night. Can anyone suggest a cause for all this heat, and a possible remedy? Does anybody have an idea where I can get some schematics for this. I checked Broadway music and they don't. Any suggestions would be greatly appreciated. Thanks

Report message to a moderator

Re: Bass 150 Smoked [message #2285 is a reply to message #2283]

Fri, 03 January 2003 14:21

hayfever
Messages: 16
Registered: January 2000
Location: Sterling, VA

Junior Member
Webmaster

My father, KustomDan, has lots of schematics that he sells for the cost of reproduction and shipping. Give him an e-mail at kustomdan@vintagekustom.com with what you need and he just may have it.

---Hayden Olenik
---Webmaster, VintageKustom.com

Report message to a moderator

Re: Bass 150 Smoked [message #2309 is a reply to message #2285]

Mon, 06 January 2003 07:33

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

On each circuit board there is a PC number. yyou need that number for a schematic. I think the 150 uses the same driver board as the 250 which is most likly where your problem lies, and I cam fax you a layout for that board.In fact if this is a metal face amp I also think the preamp boards are the same.

Report message to a moderator

K150-B Schematic needed [message #2568 is a reply to message #2283]

Mon, 10 March 2003 12:03

robfields4
Messages: 1
Registered: March 2003

Junior Member

Desperately searching for a schematic for a K150-B amp. We thought this was a guitar amp but now we're assuming it's probably a bass amp; thus the "B". Any suggestion on where to find a schematic is appreciated.

Report message to a moderator

Re: K150-B Schematic needed [message #2583 is a reply to message #2568]

Tue, 11 March 2003 12:51

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Is this a combo bass amp?

Report message to a moderator

Previous Topic:	K200B 1 Schematic Needed!!!
Next Topic:	kustom 300 pa

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr #d 19:08:11 EDT 2024

.:: Contact :: Home ::.