Home » Classified Ads » Wanted » cabinet handle (looking for a cabinet handle K 200 2 2x12 cab )
cabinet handle [message #25102] Tue, 21 June 2016 16:24 Go to next message
mjg3145 is currently offline  mjg3145
Messages: 16
Registered: June 2016
Junior Member
one of my handles on the 2x12 cab is missing the black plastic part. If someone has one let me know
Mike
Re: cabinet handle [message #25106 is a reply to message #25102] Thu, 23 June 2016 00:05 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
If you look on ebay under Kustom then go to musical instruments you will see that someone has handles....new for sale $21.50 plus shipping. This is the complete handle. I ordered 4 so there is 6 still left at the time of this posting.
Re: cabinet handle [message #25108 is a reply to message #25106] Thu, 23 June 2016 07:33 Go to previous messageGo to next message
pleat is currently online  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
The handles on ebay are for the newer Kustom Coupe 36-72 amps. These handles are wider than the original kustom handles from the 60's. The original handles, the inner most holes on hinges measure 3 7/16 inches apart. The newer handles, the seller states the inner most holes on hinges measure 4 inches apart.
pleat
Re: cabinet handle [message #25109 is a reply to message #25108] Thu, 23 June 2016 10:37 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
Well that bites........good thing I'm recovering two of those cabinets anyway. That's what I get for not consulting the master first. Thanks Pleat. @#%!* Smile
Re: cabinet handle [message #25110 is a reply to message #25109] Thu, 23 June 2016 11:08 Go to previous messageGo to next message
mjg3145 is currently offline  mjg3145
Messages: 16
Registered: June 2016
Junior Member
Thanks I saw that cabinet handle for $21.50 as well. Since my rig is a late 60's The one on E bay may not have fit correctly. I was going to measure the screw holes on mine, but I bet they will be less than 4 inches apart as you stated.

Mike
Re: cabinet handle [message #25113 is a reply to message #25110] Thu, 23 June 2016 16:59 Go to previous message
kustomoholic is currently offline  kustomoholic
Messages: 227
Registered: March 2009
Location: Tulsa,oklahoma
Senior Member
There was a supplier in Wisconsin that modified those handles to fit the original hole pattern..... no longer available today but the basic mod is a bit of bending the handle frames to move the holes into a usable size. I have 2 pair of these on some black Pa 4-12 cabs. Worked fine for me.
Previous Topic: 420 Speaker baffle with Chrome tubes on grill
Next Topic: Kustom K200A-4
Goto Forum:
  


Current Time: Thu Mar #d 12:54:22 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.