CCRBergese Messages: 22 Registered: April 2011 Location: Argentina
Junior Member
Hello there, I have a K150 with 2 Kustom 12ohm speakers. They are connected in serial so, they will be in 6omhs, right? Well, the combo sounds TOO loud,what can I do to have "less" power? Should I connect them in paralel? Which is the minimum load of the K150?
The other question: How those the tremolo - vibrato control works? I want to get the Fogerty tremolo sound... How do I have to get the Speed-Intensity-Trem/Vib controls? Silly question, sorry!!!
pleat Messages: 1452 Registered: June 2004 Location: Belding, Mi
Senior Member
The speakers wired from factory would be parallel for the 6 ohm total load. Wire the speakers in series will get you a 24 ohm total load which should lower the volume. As far as the Fogerty sound, you will have to experiment. John's original K200A-4 amp has both tremolo and vibrato and can be mixed together. Your amp just has vibrato.
pleat Messages: 1452 Registered: June 2004 Location: Belding, Mi
Senior Member
Your post mentioned the K150. I assume it is the K150-2 amp head and seperate cabinet since you mentioned the 12 ohm speakers. The amp should also have reverb.