Home » VintageKustom.com » Repairing Kustom Amps » Kustom KSC 215 (How to remove metal grill from Kustom KSC 215)
icon5.gif  Kustom KSC 215 [message #26626] Sat, 17 March 2018 01:32 Go to next message
perriercanadian is currently offline  perriercanadian
Messages: 2
Registered: March 2018
Junior Member
How to remove metal grill from Kustom KSC 215. Need to replace speaker
Re: Kustom KSC 215 [message #26628 is a reply to message #26626] Sat, 17 March 2018 06:47 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4212
Registered: June 2004
Location: NY
Senior Member
If it's a flat plate type or a round type they just should be screwed to the baffle
If it's a flat plate type sometimes you need to look real close for the hold down screws as the are black and blend in real well!
Re: Kustom KSC 215 [message #26629 is a reply to message #26628] Sat, 17 March 2018 10:23 Go to previous messageGo to next message
perriercanadian is currently offline  perriercanadian
Messages: 2
Registered: March 2018
Junior Member
There is two screws on top and bottom... seems the grill goes inside the wood.. there is a link to the speaker... apparently can not post a link until i post ten messages... search "Kustom KPC215H 2x15" PA Speaker Cabinet with Horn"
Re: Kustom KSC 215 [message #26631 is a reply to message #26626] Sun, 18 March 2018 06:49 Go to previous message
stevem is currently offline  stevem
Messages: 4212
Registered: June 2004
Location: NY
Senior Member
I do not know that any of us here have any experience with these non vintage currently made models so I would suggest you contact Kustoms support dept and I would guess they can help you out!

[Updated on: Sun, 18 March 2018 06:49]

Report message to a moderator

Previous Topic: Reverb issue with 250 guitar head
Next Topic: '72 SC-150
Goto Forum:
  


Current Time: Mon Oct #d 16:39:35 EDT 2019
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.