Kustom 300 PA [message #2775] |
Fri, 30 May 2003 23:13 |
|
I have basically two questions.
Does anyone have a schematic for 300 PA?
Also, any suggestions on if and where I can have one of the speakers reconed from a 302 column. It's a 12" I believe cts. Are replacement parts avaliable? The part # on the Magnet is 038 5006 00, but the cone has 137-0002-00 on it.
I inherited this from my father, and we've used it for our vocals for 5 years now. The head's starting to get a little noisey, and I had to temporarily replace one speaker until (if) I can get this one repaired. I love this thing, I'd rather keep on using it.
Thanks.
|
|
|
Re: Kustom 300 PA [message #2777 is a reply to message #2775] |
Sat, 31 May 2003 12:16 |
Bill
Messages: 64 Registered: March 2002 Location: Kansas
|
Member |
|
|
I had mine reconed by Kansas Sound.
Kansas Sound
4840 North Glendale
Bel Aire, KS 67220
316-744-6058
but any speaker recone tech can do it for you. There are several on the internet, Here is a link to several over the nation...
http://www.recone.com/
Thrill Bill
|
|
|
|
Re: Kustom 300 PA [message #2787 is a reply to message #2775] |
Wed, 04 June 2003 10:12 |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Hello again. To get schematics, write to ( bob monday)231 w. northbend rd, cincinnatti, OH, 45216.Kustom boards have PC numbers printed on them, you will have to tell him what numbers you want and if you want the power supply layout which has no PC number.He gets three dollars per schematic, which includes shipping.
|
|
|