Home » VintageKustom.com » Replacement Part Suggestions » KB150-1 T'n'R Sleeve/Case (Info Required...)
icon5.gif  KB150-1 T'n'R Sleeve/Case [message #27910] Tue, 27 October 2020 12:15 Go to next message
HarrySeven is currently offline  HarrySeven
Messages: 2
Registered: October 2020
Junior Member
Hiya.

I'm based in the UK and have just acquired a k150-1 amp head, but it's missing it's Tuck 'n' Roll sleeve/case.

I just wondered - are any other sleeves/cases interchangeable, size-wise?

Thanks! Smile
Re: KB150-1 T'n'R Sleeve/Case [message #27911 is a reply to message #27910] Tue, 27 October 2020 12:24 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
The metal face K150 non combo head was a one of a kind size case.
In all likelihood you will have to make a case or if your lucky and find a used K150 combo cabinet then you could cut the speaker section off it and atleast have most of the case with its T & R covering!

[Updated on: Tue, 27 October 2020 12:25]

Report message to a moderator

Re: KB150-1 T'n'R Sleeve/Case [message #27912 is a reply to message #27911] Tue, 27 October 2020 14:11 Go to previous messageGo to next message
HarrySeven is currently offline  HarrySeven
Messages: 2
Registered: October 2020
Junior Member
Thanks for the swift response. Smile

Damn, that's a shame - I was hoping I could pick something up second-hand.

Not a problem, though - fabricating a sleeve should be quite straightforward...
Re: KB150-1 T'n'R Sleeve/Case [message #27913 is a reply to message #27910] Wed, 28 October 2020 05:37 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Well you never know , you might find a badly blown up one that's not worth fixing and commander the cabinet from that!

The 4 machine screws that you will need to hold it into the cabinet you make are 10-32.

[Updated on: Wed, 28 October 2020 05:40]

Report message to a moderator

Previous Topic: 200A vs 200B
Next Topic: cheap casters
Goto Forum:
  


Current Time: Thu Mar #d 19:28:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.