Home » VintageKustom.com » Repairing Kustom Amps » Power Cord
Power Cord [message #4241] Fri, 21 May 2004 19:01 Go to next message
DaveK
Messages: 5
Registered: May 2004
Location: Indian Head, Maryland
Junior Member
I just recapped my K200 B 1 and thought I would replace the power cord. Connected black to black white to white and the green to the chassis side of the cap on the switch. When I turned it on the fuse blew! I am thinking a bad cap? Any suggestions would be most appreciated! It did work great before I put the new cord on.
Re: Power Cord [message #4242 is a reply to message #4241] Fri, 21 May 2004 19:20 Go to previous messageGo to next message
Anonymous
I am having the same problem. Every time i turn it on i blow a new fuse. Does anyone know what kind of fuses the Kustom Tuck and Pull Bass Amp 1-15AB SC - 150 Watts uses? Thanks, Mat
Re: Power Cord [message #4244 is a reply to message #4241] Fri, 21 May 2004 22:41 Go to previous messageGo to next message
LesS is currently offline  LesS
Messages: 477
Registered: December 2002
Senior Member
I just connect the green to ground - to a screw in the back of the chassis. On mine, no connections on the switch seem to be grounded.
Re: Power Cord [message #4247 is a reply to message #4244] Sat, 22 May 2004 00:23 Go to previous message
DaveK
Messages: 5
Registered: May 2004
Location: Indian Head, Maryland
Junior Member
Up date, I went ahead and rewired the switch since the capacitor is no longer needed. Put a single pole 3 way jumpered so the amp will come on from either postion. connected the incoming neutral directly to the PT neutral. Bottom line it works great! it even seems to be a bit quieter. If any one needs specifics let me know and I will send you detailed info.
Previous Topic: Does my K200 sound alright?
Next Topic: K200 B 1 Bridge Rectifier
Goto Forum:
  


Current Time: Sun Apr #d 02:57:09 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.