VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » K200B1

Show: Today's Messages :: Show Polls :: Message Navigator

K200B1 [message #4424]

Mon, 05 July 2004 20:27

knucklehead
Messages: 3
Registered: June 2004
Location: The Que

Junior Member

I'm new to the site but recently picked up a 2-12 cab(blue) with a K200 head(black) and I was looking for a wiring schematic for the head. Just trying to prepair or the possiblity of it needing repair in the future. Wondering if someone could help me out.

Report message to a moderator

Re: K200B1 [message #4444 is a reply to message #4424]

Thu, 08 July 2004 07:41

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

HI, kustom heads use PC numbers on there circuit boards, Like pc5056, or pc703. PLUS, these boards have revision numbers also, like pc703 rev-1. These numbers face the amp wall they are mounted to, so to get the number you have to remove the board. I have some schematics,if you get your board numbers mail me a self addressed stamped envelope, and I will makw you copys of what I have. Steven Magnotti P.O box 1160 yorktown hts Ny 10598.Made one day, with my friend from this site Les, we can determin by amp serial number what board and revison number go to what head.

Report message to a moderator

Re: K200B1 (revisions) [message #4450 is a reply to message #4444]

Thu, 08 July 2004 14:35

LesS
Messages: 477
Registered: December 2002

Senior Member

No Message Body

[Updated on: Wed, 17 June 2009 21:58]

Report message to a moderator

Re: K200B1 [message #4452 is a reply to message #4424]

Thu, 08 July 2004 16:39

QModer
Messages: 413
Registered: June 2003

Senior Member

Since you have a 100 series cab and a 200 series head would you be interested in selling the cab?

Report message to a moderator

Re: K200B1 [message #4455 is a reply to message #4424]

Fri, 09 July 2004 07:12

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Hey Les, Thanks for the info. How is the 200 head working for you?

Report message to a moderator

Re: K200B1 [message #4459 is a reply to message #4444]

Fri, 09 July 2004 09:15

knucklehead
Messages: 3
Registered: June 2004
Location: The Que

Junior Member

I'll check it out this weekend and see where we get. Thanks.

Report message to a moderator

Re: K200B1 [message #4460 is a reply to message #4455]

Fri, 09 July 2004 09:17

knucklehead
Messages: 3
Registered: June 2004
Location: The Que

Junior Member

The head is actually working great, but it's pretty dirty on the inside, plus the ground wire on the inside came loose, causing some pretty good noise. I just mainly want the info just in case of bad mojo happening.

Report message to a moderator

Previous Topic:	K200B 5 PA Schematics Request
Next Topic:	Missing pedals for K250-4

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Apr #d 09:07:03 EDT 2024

.:: Contact :: Home ::.