Home » VintageKustom.com » Replacement Part Suggestions » Power lamp replacement procedure 150/250/300 series

Show: Today's Messages :: Show Polls :: Message Navigator

Power lamp replacement procedure 150/250/300 series [message #5124] Tue, 30 November 2004 20:00   kingpin Messages: 2 Registered: November 2004 Junior Member Would like to replace the lamps in the switches on my 250 and 300 series heads...I have heard this can be tricky. Anyone got a procedure that will get the job done minimizing any chance of breakage?????? I have heard the Ge335 bulb or radioshack 272-1143 is a correct replacement Report message to a moderator

Re: Power lamp replacement procedure 150/250/300 series [message #5125 is a reply to message #5124] Tue, 30 November 2004 20:16   voided3 Messages: 200 Registered: July 2004 Senior Member Hello. I remember a long while back someone posted the same question and got many responses. If you search through the forum you will most likely find it. Sorry I couldn't be of more help, but I know other posts can, so good luck! Report message to a moderator

Re: Power lamp replacement procedure 150/250/300 series [message #5126 is a reply to message #5124] Tue, 30 November 2004 20:23   voided3 Messages: 200 Registered: July 2004 Senior Member Hello again. Found the post, do a search for "250 bulbs??" That should answer any of your questions. Good luck! Report message to a moderator

Re: Power lamp replacement procedure 150/250/300 series [message #5130 is a reply to message #5124] Thu, 02 December 2004 12:54   kingpin Messages: 2 Registered: November 2004 Junior Member Thanks...I have 4 bulbs to replace! My 150 Blue sparkle Pa still has 2 bulbs that work after 35 years!!! My 250 /1-18 setup and 300pa head bulbs are doa bulbs. Any one know if the 1-18 folded horns were made in anything other than black???? I have an 18" Blackwidow in 4 ohms sitting around...anyone ever install one of these in the 1-18 cab..Just curious. Alsoooo...... Looking for a Charger combo and 2-15b bottom in black too. Report message to a moderator

Re: Power lamp replacement procedure 150/250/300 series [message #5131 is a reply to message #5124] Thu, 02 December 2004 16:31   voided3 Messages: 200 Registered: July 2004 Senior Member Hello. As far as I know, the folded horns were offered in all of the availiable colors at the time, being blue, cascade, black (crinkle and smooth) and white. The most common by far is black, but I once saw a 1-18 in blue on ebay, and on special order they were availiable in red and gold as well i believe. Good luck! P.S.- put a post in the classifieds if you are selling/looking for stuff Report message to a moderator

Previous Topic:	Glides on bottoms of cabinets & heads
Next Topic:	Frankenstein treble pot value for less hiss?

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum