Home » VintageKustom.com » Repairing Kustom Amps » EV SRO 15" speakers

Show: Today's Messages :: Show Polls :: Message Navigator

EV SRO 15" speakers [message #5524] Thu, 24 February 2005 23:15   voided3 Messages: 200 Registered: July 2004 Senior Member Hello. I just recently acquired a pair of EV SRO 15 loaded home built folded horn cabs. Does anyone know the specs on these? They have massive magnets with a white bell cover the size of a mixing bowl. I was wondering what kind of wattage they can take if anyone knows. Thanks! Report message to a moderator

Re: EV SRO 15" speakers [message #5525 is a reply to message #5524] Fri, 25 February 2005 09:37   stevem Messages: 4733 Registered: June 2004 Location: NY Senior Member If you go to the EV site, and contact them, I`am sure they can tell you. I had EV eliminator cabs years ago and I recall them being good for 150 watts RMS I think. Report message to a moderator

Re: EV SRO 15" speakers [message #5540 is a reply to message #5524] Mon, 28 February 2005 20:40   voided3 Messages: 200 Registered: July 2004 Senior Member Hello. I emailed them and got the spec sheets. The wattage rating for the standard SRO15 is: 60 watts continuous sine wave 150 watts pulsed program 300 watts peak 600 watts peak to peak 2.5 inch voice coil 16 lbs. magnet structure They also made an SRO15L, which I guess stands for "low frequency." Those specs are: 100 watts continuous sine wave 2.5 inch voice coil 16lbs spoked magnet structure Notable about the SRO15L is that the spec sheet had a Kustom logo on it as well, and the service contact was the Kustom factory in Kansas; I think they used these in their '70's tolex amps. Report message to a moderator

Previous Topic:	Repairing a reverb tank/reverb problem....
Next Topic:	K200 B Head

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum