Home » VintageKustom.com » Comment Board » Tell me about my pa system
Tell me about my pa system [message #583] Thu, 31 May 2001 08:54 Go to next message
RA
Messages: 1
Registered: May 2001
Junior Member
Just found your site and it's great. I have had this unit for quite some time but know very little about it. I bought it used with no manuals or anything. It's got two PRO 15 P Speaker cabinets and a powered mixer (130 watts). The speaker cabinets say that they are from Chanute, Kansas. The only model information I have is the unit says BC A on it. It has six channels with low and high inputs. I use it to dj a few car shows and it works fine. However, I sure would like to know a little about it. Looking forward to hearing from you Kustom Kats.
Re: Tell me about my pa system [message #586 is a reply to message #583] Thu, 31 May 2001 14:51 Go to previous messageGo to next message
Anonymous
hey RA...welcome to the mess...and we are... I wanted to say hi..even though I'm no good at the numbers... I just fell in love with tuck n roll about 30 years ago and never left it...Kustom made so many great things through the years that I've not been able to keep up..hopefully you'll hear from some of the pros on this site..in the mean time, glad to have you....ET
Re: Tell me about my pa system [message #598 is a reply to message #583] Fri, 01 June 2001 17:56 Go to previous messageGo to next message
Anonymous
I was looking through a 1979 kustom catalog and you have the 3BCA head which is what kustom called the Briefcase PA head that has hi and lo impedance inputs, expander input that would allow a seperate mixer to share the internal power amp. 130 watts. It is a pretty straight forward mixer. The speaker cabinets are the PRO 15-P which states a 8 ohm box with a 15" heavy duty speaker and two piezo tweeters. I had a pair of the cabinets in the early 80's and they were make to compete with the EV TL806 cabinets. They do sound good. Hope this helps. Don
THANKS [message #603 is a reply to message #598] Fri, 01 June 2001 23:46 Go to previous messageGo to next message
Anonymous
Thanks. The amp is in a plastic "briefcase." I guess that's why they call it a briefcase amp. The handle is broken on it. It still works, though. I've had the woofers reconed since I bought it and the guy who did it told me that they were good speakers. I think so too. While my stuff is tolex and not tuck and roll, at least it's real Kansas Kustom.
Re: Tell me about my pa system - Pro 15 P speakers [message #18759 is a reply to message #598] Mon, 20 May 2013 11:32 Go to previous messageGo to next message
ghmbollen@gmail.com is currently offline  ghmbollen@gmail.com
Messages: 1
Registered: May 2013
Location: Antwerp, Belgium
Junior Member
Hi Don or anyone else who can help.
I'm trying to find out how many Watts the Pro 15 P speakers are.
According to the information from Don in this thread they are 8 Ohms, but it would be very good to know how many Watts.
Can anyone help? Thanks, Guido
Re: Tell me about my pa system [message #18764 is a reply to message #583] Tue, 21 May 2013 07:34 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
I think the 15 drivers them seleves may be EV speakers which would likly be rated at 150 watts RMS.
The piezo high`s are prone to blow out the way most manufacturer`s use used them back then as they need a 10 watt resistor in serise with them to keep too high a signal volatge from popping them.
Sorry, but off the top of my head I can not recall the recommended ohms value for the resistor.
A band I played in back in that era had your powered mixer and we used it thru two Peavey cabinets that where like the common Altecs of the day, you know a 15 driver and a nice big radial compression horn, anyway we never had a issue with that mixer and as was the norm back then we played loud and used near every watt that mixer had to offer.In fact so much so that on one gig one horn when out and during a break to check it out I found a melted solder connection on the horn`s crossover network due to the power going thru it!
Re: Tell me about my pa system - Pro 15 P speakers [message #18765 is a reply to message #18759] Tue, 21 May 2013 07:51 Go to previous message
pleat is currently offline  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
Kustom offered the Pro 15P and the Pro 15T. The difference is the Pro 15T used the Electro Voice SRO 15" speaker and the T-35 tweeter crossing the horn at 3500Hz. The Pro 15P used the standard KEI 15" speaker and two Piezo tweeters. The Pro 15T is rated at 100 watts RMS and I would guess the Pro 15P would be rated less, maybe 75 watts. Using both cabs to your lll BCA PA head, you have the 4 ohm load the amp wants to produce the 130 watts RMS, so each cab is taking 50% of the total load.
Kustom also offered the same components in their slant monitor versions.
pleat
Previous Topic: Kustom Electronics Tn'R 3-12s
Next Topic: Information Needed
Goto Forum:
  


Current Time: Fri Mar #d 00:35:46 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.