stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
Hunt one down on ebay, if you want a vintage one,or any fender/marshall or peavey swts with out LEDs will work.They just may turn the wrong function in the kustom on and off in error of what the foot swt may say.If you do not want kustom, log onto antique electronics, they have a bunch.
BC Messages: 583 Registered: March 2000 Location: Kentucky
Senior Member
HI Josh! Congrats on your new Kustom and welcome to the group! Good people here always willing to help. I play bass and use Kustoms exclusively. Just a hobby but we still do about 3 weekends a month so the tuck and roll gets plenty of use! Tell us more about your amp....did you get a cabinet yet? What instrument do you play? What are your plans for the B-2? BC
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
The brite and normal channels, are just that tone range differences. The high and low are gain differences just like input 1 and 2, low and higher gain on classic fender and marshall amps.
JoshHignos Messages: 6 Registered: June 2005 Location: houston TX
Junior Member
I have a gallen kruger backline 4x10 cab that im goin to run it through and im going to be using my austin bass which i modified with a Mighty Mite soap bar pickup. i will also be running a boss DS-1 distortion pedal and a boss DD-3 or dd-6 delay pedal i cant remember. Ill be playing this with my band Astoria TX (PLUG!!! www.astoriatx.com) i was using an audio choice PA head previously and it sounded pretty bad i think because of the restricted equilizer settings and because that pa is cheap and meant for vocals not bass