Home » VintageKustom.com » Comment Board » ever open a kasino?

Show: Today's Messages :: Show Polls :: Message Navigator

ever open a kasino? [message #5958] Tue, 12 July 2005 03:43   chguat Messages: 8 Registered: June 2005 Junior Member Hey, has anyone out there ever opened a Kasino head? I have a Kasino Natural bass head that I need to replace the cord on, and I can't see any logical way of opening the head up. Everything looks riveted together, and I don't see any screws or panels that might come off. Anyone ever dealt with this? Also, when I install the new three prong cord I just want to make sure I have the procedure down. I put white wire where the old white wire was, I put the black where the black was, and I read one post that said I could run the ground to the screw that holds the plastic piece for winding the cord. That sounds like the easiest way to do it, but should I be looking for a better place to run the ground? Suggestions? Report message to a moderator

Re: ever open a kasino? [message #5959 is a reply to message #5958] Tue, 12 July 2005 08:46   stevem Messages: 4730 Registered: June 2004 Location: NY Senior Member I have never seen a kasino amp out of the cab, but I find it hard to think that its made that way, after all their service centers had to repair the things without drilling out rivets and dumping metal fillings in the amp.bolt the green ground of the A/C down away from the preamp boards, best spot is nearthe power transformer even if you have to drill a 1/8" hole for a number 10 machine screw.If you can post a picture of the anp chassie. Report message to a moderator

Previous Topic:	WHOOHOO just got one
Next Topic:	What kind of setup do you use with your kustom?

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum