baskerville Messages: 9 Registered: June 2005 Location: Ottawa/Hull
Junior Member
Hello,
Can someone describe to me the type of footswitch that was used on the Kustom 250 Series of amps? There is a XLR type connector on the back of the Amp. Is this where the footswitch connected? And if so, where can I find a replacement?
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
Hi, A replacement you will not find, but if you hunt on ebay, or get a copy of vintage guitar mag and call up a bunch of shops and put the word out they may beable to turn up one.I have a 250 amp and a schematic(the head does not have fuzz or wah) if I get the time over the week end, I will take a look and see if I can tell you how to wire up(make your own) ft swt, but let me know if you have the head with fuzz and wah, or just vibrato/tremlo and reverb.
baskerville Messages: 9 Registered: June 2005 Location: Ottawa/Hull
Junior Member
My head is the 250 Model - 2. So, there is no fuzz or wah. Just Reverb, Tremolo and Vibrato. If you can pull together a schematic, that would be great.