Home » VintageKustom.com » Replacement Part Suggestions » Kustom covers for amps and cabs!
Kustom covers for amps and cabs! [message #6199] Wed, 05 October 2005 19:36 Go to next message
Johnkop is currently offline  Johnkop
Messages: 2
Registered: July 2005
Location: Florida
Junior Member
http://store.amplifiercovers.com/kustom.html

Hello fellow Kustom addicts this company has
covers for almost all of the cabs and amps.

I know everbody keeps looking for these and
they're not expensive.

Just wanted to give everyone the info.

John
Re: Kustom covers for amps and cabs! [message #6200 is a reply to message #6199] Thu, 06 October 2005 07:52 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Thanks for the info!I need a bunch of them.
Re: Kustom covers for amps and cabs! [message #6208 is a reply to message #6199] Fri, 07 October 2005 03:12 Go to previous messageGo to next message
fieldflower is currently offline  fieldflower
Messages: 71
Registered: July 2004
Location: Sweden
Member
Now that looks nice...

Question though - I have a 250 head and 2x15 cab but they only have standard covers for the 200 head and 2x15 cab.
There is of course the possibility to order on special request, but if a standard model would fit...

Are the 200 and 250 the same dimensions, and did they use the same dimension 2x15 cab?
Would it work (and look good) if I ordered the 200 and 2x15 covers?

/Peter
Re: Kustom covers for amps and cabs! [message #6209 is a reply to message #6199] Fri, 07 October 2005 08:11 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
The pre 1970 2-15 and 3-15 cabs have a taper from top to bottom, the latter did not.So while a latter cover will work on a earlyer cab it will be loose on top.The 250 head is tapered from top to bottom on the front sides, the bottom being larger or depper than the the 200 heads.
Re: Kustom covers for amps and cabs! [message #7639 is a reply to message #6199] Fri, 29 September 2006 15:58 Go to previous messageGo to next message
kevineh is currently offline  kevineh
Messages: 21
Registered: August 2006
Location: Southern California
Junior Member
hey steve, is this confirmed? I just bought a 3x15 cabinet and it gets slightly skinnier from bottom to top. I bought it with a 250 head, so does this mean that the cabinet is from the 60s and my head is 1970 probably (it was serviced in 71 according to the log in the inside). My 250 head overhangs on the top and I thought that was a little weird. If I had gotten a 3x15 cabinet that was from the 70s and not tapered, the 250 head would fit comfortably on top and not overhang?
2 more questions to you steve...
I've seen the term frankenstein thrown around on the board. Is a 3x15 considered frankenstein?
3rd question
I looked back on the board from a couple years ago when there was talk about cleaning up the 3x15s sound, and putting in 2 8inch speakers where the top 15 was. How did that turn out? Was there a solid conclusion to a better sounding 3x15 cabinet? I remember the reason why the top 15 was taken out was becuase there was less space in the top part of the cabinet, wouldn't that just be the case for the pre 70 cabinets and not post 70 cabinets according to this current post? confused newbee, thanks.
Re: Kustom covers for amps and cabs! [message #7645 is a reply to message #7639] Sat, 30 September 2006 09:29 Go to previous message
C4ster
Messages: 686
Registered: June 2001
Location: Mukwonago, WI (Milwaukee...
Senior Member
Just to confirm what you were thinking. A 100-200-400 series cabinet was tapered. I know that a 150 speaker is not tapered and I would suspect that a 150 head was larger at the bottom and would match the top of the speaker cabinet in dimension. Interestingly enough, the 100 and 200 heads were slightly smaller than the bottom they sat on. So you could bring it to the front and match the faces of the cab and head or push it to the rear and have a small lip on the speaker bottom. Boy, how anal retentive is that?? Laughing There wasn't eneough room to set your beer though. Now, as far as the Frankenstein series is concerned, that was the original design of Kustom back in 1966. It lasted just a year or so and the high forhead was chopped to match the rest of the cabinets. Also, port holes were optional at that time but the cabinets were ported. In addition, the Franks and matching cabinets were only 11 pleats wide and didn't match any of the following series at all. The Frank cabinets didn't have a Kustom logo. Check the literature section and spend some time looking at the wide range of systems Kustom built. It is quite staggering.
Conrad
Previous Topic: Newbi w/ a P-shop K200A-? Smudge head
Next Topic: KUSTOM 200Watt guitar head, transistors?????
Goto Forum:
  


Current Time: Thu Mar #d 04:15:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.