Home » VintageKustom.com » Comment Board » 2x12 Cabinet Question
2x12 Cabinet Question [message #7905] Sun, 03 December 2006 20:47 Go to next message
KustomG is currently offline  KustomG
Messages: 41
Registered: May 2006
Member
I have a 2x12 Kustom cab that originally came with Jensen C12N speakers (thank you Steven) and currently has CTS speakers in them. I'm looking at replacing the CTS's with a pair of new Jensen C12N speakers and wanted to know if the original Jensens were rated at 16 ohms wired in parallel? The current CTS speakers that are in it are 16 ohms wired in parallel. I want to put it back into it's original condition. I don't currently have a head for it (a silver sparkle K 100, if anyone has one to sell!! ), but keep looking. I'm playing my K-200 head thru it in the mean time. Thanks for any info.
Re: 2x12 Cabinet Question [message #7906 is a reply to message #7905] Mon, 04 December 2006 06:57 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Since the K100 wants to see a 8 ohm load, two 16 ohms in parallel is what you want. Also while you are playing the K200 thru it, the 8 ohm setting will keep it from putting out is full 100 watts RMS which could pop those CTS drivers.
The new Jensen C12N models and the whole new Jensen line do not use paper voice coil formers anymore, and as souch they will never sound just like a original model, but they do handle more power, I would break the new ones in for about 4 to 6 hours(out of the cabinet so the 60 cycle tone doesnt driver you nuts)this will give them a bit more punch at low to mid volume just as if they have been played for some years.
Re: 2x12 Cabinet Question [message #7936 is a reply to message #7906] Sat, 23 December 2006 21:51 Go to previous message
Kustom2468 is currently offline  Kustom2468
Messages: 5
Registered: December 2006
Junior Member
If ur switching to a k100 from a k200, would u be willing to sell the k200? i am looking to get as many k200's as i can. Thnx
Previous Topic: ?????K200B5?????
Next Topic: PA Horn Driver
Goto Forum:
  


Current Time: Thu Mar #d 07:32:25 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.