VintageKustom.com: Comment Board

Home » VintageKustom.com » Comment Board » Model 215c??

Show: Today's Messages :: Polls :: Message Navigator

Model 215c?? [message #8043]

Tue, 16 January 2007 13:39

margolin
Messages: 4
Registered: January 2007
Location: Vancouver, WA

Junior Member

Okay . . . I have an older Kustom head with Tuck and Roll (black), tremelo, reverb, and bright pull knobs (though, I don't have the knobs and I can't get the metal to turn properly on the bright). I'm trying to figure out what style head I have, but I am new to the Kustom world and I can't. It's a model 215c . . .

any help would be awesome!

Thanks,
Chris.

Report message to a moderator

Re: Model 215c?? [message #8045 is a reply to message #8043]

Tue, 16 January 2007 15:22

LesS
Messages: 477
Registered: December 2002

Senior Member

It sounds like a 2-15C-2.
This is a Kustom 200A head that came with a 2x15 cabinet with CTS speakers.
The serial number on the head is probably somewhere around 15xxx to 17xxx - it was made in 1967.
The 200A head is best used with a 4 ohm cabinet.
It puts out 100 watts RMS at 4 ohms and about 70 watts RMS at 8 ohms.

Check this website or ebay for replacement knobs for sale. Also search for "Knobs" on this website to get info. Radio Shack has some knobs #274-416 that are four for $2.99. They are a little bigger than the stock knobs but they aren't too bad.

[Updated on: Tue, 16 January 2007 15:31]

Report message to a moderator

Previous Topic:	Aluminum Port Holes
Next Topic:	kustom 150-8 questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri May 17 08:00:59 EDT 2024

.:: Contact :: Home ::.