SRI_AUROBINDO Messages: 4 Registered: January 2007 Location: Baltimore, MD
Junior Member
Hi all,
I posted yesterday asking if the reverb tank could be causing the problem with my bright channel not working. At practice last night I had much more of a chance to asses the situation and with our combo organ going through the bright channel a slight amount of signal passes. If the volume is all the way up it's about as loud as if you had your ear about a foot away from a phone. With this new info, does this pinpoint what the problem could be?
SRI_AUROBINDO Messages: 4 Registered: January 2007 Location: Baltimore, MD
Junior Member
Oh, also I don't know if this will make any difference as to the circuitry/layout, but the model code is 200B2, serial number 66396, and "B115-182-80 78A" is engraved on the chassis with a signed "L" which I assume is the inspector/builder. Thanks for all of your help so far.
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
Hi, No this info still does not help pin it down any better. One last but easy thing to try would be to unplug the rca cable that goes from the board to the input of the reverb pan just in case something wrong with that end of the pan is not loading down that channels signal.
The info I posted to you yesterday in reguards to the transistors does refer to a 200B model like yours.