Pajaspojken Messages: 6 Registered: March 2007 Location: Sweden
Junior Member
How do you tell the difference between the Lead III and Lead IV Cabinet? The tag on the back only says "412L". And I'm not sure, but I think there are no brand labels on the speakers. Are they hard to spot or am I just blind?
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
I`am not 100% sure but I think both heads got the same cabinet, of which both would have eitheir CTS or Eminence brand speakers. The CTS code would start with the ink stamping 67- than 3 or 4 digets, like 7345, which would be the 45th week of 1972.
Pajaspojken Messages: 6 Registered: March 2007 Location: Sweden
Junior Member
Thank you for your reply!
It's at least in very good condition, and since musical gear tends to get a higher price here (in Sweden) than in the states, I think I'll at least try to get around $200 for it.
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
Hey Les, I do not think that the 2857804 number is related to the rola manufacturer code, as I have in one of my 2-15 cabs what is oveously a CTS square magnet driver with numbers of 038- whatever, and its a reconed driver with a Kustom sticker on it.
Does anyone no why the spks in this cabinet say 8-16 ohms I thought they were one or the other? and is this cabinet wired 4 ohms from the factory. thanks
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
my guess would be that these speakers labled like that where used only in the 4-12 cabinets, as you could get a 4 ohm main load from four 8 ohm drivers, or four 16 ohm drivers depending on how your wired them.