serabul Messages: 10 Registered: March 2007 Location: home
Junior Member
Can anyone tell me if the old transformers from the early k 200b-1 be rebuilt if not I NEED ONE can enyone help send me in write direction thanks serabul
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
It cost more to rebuild one than to get a new one,Avel transformers in CT has great toroidal tramsformers, and I think the one you need is part number Y236603, but I would check with them on how many voltamps the new transformer needs to be, the old transformer put out 40 volts to a bridge type rectifier.
This will not mount like the original kustom part, you will have to get 2 steel L BRACKETS to bolt to each side to stand it up where the old one was mounted as I do not think there will be room to mount it flat where the old one was.
I your original transformer is bad, make sure the diodes or not shorted also!
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
I also think a hammond manufacturing part number 167L44 will work, but it has a center tap lead that you would not use.
This is a standartd X type mounting transformer like the original, but I would still call them to check if my choise was correct.