Home » VintageKustom.com » Repairing Kustom Amps » K200A4 footswitch

Show: Today's Messages :: Show Polls :: Message Navigator

K200A4 footswitch [message #2790] Wed, 04 June 2003 13:19 JB Messages: 32 Registered: January 2003 Location: Maryland Member Hi, I just came into a pretty nice K200A4 only thing is the footswitch did not come with it. Can someone tell me the functions of the footswitch, does it work the reverb and trem and H Clipper, Boost etc? I notice it is a four pin connector and ther is an RCA plug just above that, what is that for? Is it possible to make a footswitch? If so, what is the degree of difficulty for a do-it-your-selfer? HELP please!!! Thanks folks Report message to a moderator

Re: K200A4 footswitch [message #2949 is a reply to message #2790] Mon, 14 July 2003 21:49   pleat Messages: 1452 Registered: June 2004 Location: Belding, Mi Senior Member The K200A series needed the footswitch to activate some of the effects. The RCA jack is a line out to another power amp/tape recorder, etc. The footswitch is easy. Open up the amp and see which terminal goes to ground. Using 4 SPST switches, the ground pin goes to one side of each of the 4 switches. The remaining wires connect to the other side of each switch. You will have to wire it up and see which switch operates what effect. I have on some amps just wired them all together to get the effects to work. Don Report message to a moderator

Re: K200A4 footswitch [message #2961 is a reply to message #2949] Fri, 18 July 2003 14:19 KustomBlues Messages: 490 Registered: June 2001 Location: Michigan Senior Member www.mouser.com sells the 4 pin connectors to match the head if you need them. Report message to a moderator

Re: K200A4 footswitch [message #2962 is a reply to message #2961] Sat, 19 July 2003 02:41   Jc Messages: 217 Registered: March 2000 Location: N.W. Chicago Suburb Senior Member I have two 4 pin pedals ~ If JB or anyone needs them, let me know. Both are Reverb/Tremolo - Jc Report message to a moderator

Re: K200A4 footswitch [message #2966 is a reply to message #2962] Mon, 21 July 2003 14:08 Anonymous Just bought a K200A today, with no footswitch; was looking for one with no luck, then, found your posting - wow! I'd be interested in buying one if you could let me know the price. Thx Dave Report message to a moderator

Re: K200A4 footswitch [message #8968 is a reply to message #2962] Sun, 21 October 2007 04:33   swamprocker Messages: 22 Registered: January 2005 Location: Macungie, Pa. Junior Member Hi, Could use one of those if you stil have any. Thanks, John Report message to a moderator

Previous Topic:	Schematic needed for K200B 1 - please!
Next Topic:	Need schematics for K200B-4

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum