Home » VintageKustom.com » Repairing Kustom Amps » Removing Amp Section From K-150

Show: Today's Messages :: Show Polls :: Message Navigator

Removing Amp Section From K-150 [message #9105] Tue, 01 January 2008 09:19   Thunderchief Messages: 3 Registered: December 2007 Junior Member I need to get into the amp section of a K-150. Are there screws accessible from the bottom of the amp shelf inside the speaker cabinet or is the amp secured some other way? I figure it slides out the back of the combo once its mounting is released. Any suggestions? Report message to a moderator

Re: Removing Amp Section From K-150 [message #9106 is a reply to message #9105] Tue, 01 January 2008 09:46 rodak Messages: 511 Registered: October 2001 Location: Georgia Senior Member Yes, I believe there are four screws underneath the amp chassis. You'll have to remove the back first to get at them. www.combo-organ.com Report message to a moderator

Re: Removing Amp Section From K-150 [message #9107 is a reply to message #9105] Tue, 01 January 2008 09:55   Thunderchief Messages: 3 Registered: December 2007 Junior Member Thats what I figured. I believe the back has been siliconed in place the secure it. Looks like I'm gonna have fun. Report message to a moderator

Re: Removing Amp Section From K-150 [message #9109 is a reply to message #9105] Tue, 01 January 2008 18:56   Thunderchief Messages: 3 Registered: December 2007 Junior Member Not as bad as I expected. Only the top of the back panel was siliconed. It broke loose fairly easily. Sprayed the pots with contact cleaner. Thumping just like it always has. Thanks for the info. Report message to a moderator

Previous Topic:	Speaker Preservation and Protection Question ?
Next Topic:	K250-4 Treble Pot Value

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum