VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » 4 pin Footswitch pedal for '67 200A-4 Head
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
4 pin Footswitch pedal for '67 200A-4 Head [message #9214] Mon, 11 February 2008 03:18 Go to next message
swamprocker is currently offline  swamprocker
Messages: 22
Registered: January 2005
Location: Macungie, Pa.
Junior Member
Footswitch wanted for '67 Kustom 200A-4 head. Can't operate any of the 4 effects without it,Reverb,Trem-Vib,Boost,Clipper. Has a 4 pin XLR type switchcraft connector jack on the back of the head. I read somewhere there's a way to wire them up so they work at least..John

Report message to a moderator

Re: 4 pin Footswitch pedal for '67 200A-4 Head [message #9229 is a reply to message #9214] Thu, 14 February 2008 09:58 Go to previous message
mrpieman is currently offline  mrpieman
Messages: 12
Registered: December 2007
Location: Green Bay, WI
Junior Member
There was just one on Ebay last night. I think it was what you're looking for....

Mike

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Wanted: K200A-4
Next Topic: Name Plates
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Sep 19 15:32:12 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software