Home » VintageKustom.com » Repairing Kustom Amps » Non working channels

Show: Today's Messages :: Show Polls :: Message Navigator

Non working channels [message #984] Sun, 04 November 2001 22:25 KomboKing Messages: 44 Registered: June 2001 Location: Northern Kentucy Member Of late one of thr channels in my K-200-B-1 isn't working. It seems to be a common problem......What's up with this, anyone know? Report message to a moderator

Re: Non working channels-Volume Drop [message #1002 is a reply to message #984] Fri, 09 November 2001 12:18 Anonymous Both of the channels in my 200B-1 still work. However, the volume in the "Bright" Channel is considerably less than in the "Normal" Channel. I don't know why??? Report message to a moderator

Re: Non working channels [message #1142 is a reply to message #984] Thu, 13 December 2001 23:53 KustomBlues Messages: 490 Registered: June 2001 Location: Michigan Senior Member I was talking to Gary about Kustoms, and he said that usually the cause of a dead channel is that the first transistor in the dead channel has been static zapped to death.... He said it is a common problem. Hopefully, this solves your problem. Report message to a moderator

Re: Non working channels [message #1220 is a reply to message #1142] Fri, 04 January 2002 17:15 Anonymous I agree with Deb and Gary.....One of my 200 was channel zapped by a soundman at a blues festival. Took out the first two transistors in the circuit. Good luck! BC Report message to a moderator

Previous Topic:	200B-1 "Whooshing"/RF interference
Next Topic:	Kustom 2-15 cab question

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum